Charley's Yamaha WR450 YamaLink lowering link question

"The web site states that it will lower my bike 2", one by lowering the stock spring 1" an 1" from the yamalink. I have searched the web and can find no reference to a 1" adjustment to the stock spring. Can you please explain the adjustment for the stock spring?"

Our reply: You're looking at the wrong YamaLink. The 1" + 1" is for the WR250r and WR250x.

Steve's 2012 YZ 125 lowering for his son and the YamaLink

Hello, I am picking up a 2012 yz 125 for my son and would like to lower it using your link. Since the bike was used by a 150lb rider I will also need to buy new springs for it. He weighs 100lbs without gear on, is 5’ 3”. He is an advance motocross rider on 85’s and supermini’s, hasn’t ridden a 125 yet. The Racetech guidelines are recommending a rear shock spring of 4.2 and front springs .38.

With the yamalink should I get a heavier rear spring, in your advertisement it says 10% but is that only for over 170lbs? I want to lower it as much as possible and have 4 inches of race sag.

Our reply: Steven, Hello. My 13 year old nephew is the same height, weight and ability as your son. He recently started riding a YZ125 while still riding his Super Mini and 85. At first he put on the 1.5 with a lighter spring, but eventually went to the stock spring and the 1.5 YamaLink. Today he is on the YZ RACE.

My recommendation for 99% of lightweight YZ 125 riders is to consider a lighter spring, but for the 1% of kids like your son and my nephew I say try the stock spring first (the too-heavy one) and reset sag and go in clockwise on the high-speed compression (the big knob atop the shock, not the flat blade) in 1/3 turn increments until the bike handles big g-outs and flat landings.

My 16 year nephew weighs 140 and races local pro, borrowing (stealing) his little brother's YZ for Schoolboy when his own KX450 is tore apart. He ran the stock spring and the 1.5 for a few months, and loved it but said he'd probably go to a slightly heavier spring. But since the bike has the RACE YamaLink on they have zero issues....and they're not just saying that cuz I'm their uncle. Dang kids!

Hope this helps. Let me know if you have more questions.

Brad asks for a little help setting sag on WR250R WR250X lowering link YamaLink

Brad, The YamaLink comes with super easy to follow install instructions. Here is a copy/paste of the fine tuning:

RESET SAG to factory spec. Most settle at 3.25 inches. If you feel the rear is too soft, turn in the compression just a little bit & rebound in 1 or 2 clicks. Fine-tune based on terrain, personal preference, etc. Combined with the stock .9 inch lowering option via the shock block (http://www.wrrdualsport.com/tech-guide/suspension/115-lowering-r2), the YamaLink lowers the rear suspension an additional inch.

IMPORTANT! Slide the fork tubes UP in the triple clamps - start at around 12mm & adjust based on preference. FYI, 18mm is the MAX you should go. Re-torque the upper fork clamp bolts to 17ft. lbs. & the lower clamp bolts to 14ft. lbs. And don't forget to properly tighten the chain before riding.

Larry's Yamaha WR250R WR250X lowering link install question

Larry from Florida writes "Just got my link. Watched the install movie and looks simple except for, is the bike sitting on ground or unloaded????"

Our reply: I find it much easier to put the WR on a stand or box. But a few do it with the bike on the ground.

Steve from Tucson's 2003 Yamaha WR250F YamaLink lowering link

I received the YamaLink and installed as per your advise & instruction. We went riding yesterday and it work perfectly. It was a joy to ride & not have to worry about finding a high spot to ensure my balance. The performance while riding seemed just as it was before. Thanks for taking the time to help me understand how it would work and for the great product. It was worth every penny. Regards, Steve 2003 WR 250F