Chris from Australia has lowering link shock setup question WR426

Yamalink works great. Lowered a fair bit and now i can handle the wr426 a lot better. Brought front forks up 3mm and its tops. Only thing is the suspension is a tad soft now. I did notice that you say to get a 10% heavier spring to account for this but im finding it difficult to read the sprig rates. Can you give me a hand in selecting a spring? I have no issues installing it myself.

Our reply: Set your race sag to 94mm - 90mm and turn the high speed compression knob in clockwise half a revolution. Don't even touch the flat blade. At 75kg (165 pounds) you are totally fine with the stock spring if the shock has not been revalved.