Ben asks.... "I have successfully installed the YamaLink. Set the sag to 4 inches. Dropped the triple tree by 6mm. Rear shock springs 6kg. I weigh 100kg. After an off road ride, I found the front wheel to be sliding sideways when going into a turn / corner. I soften the compression and rebound by 2 clicks from original. Should I reduce the drop to 4mm rather than 6mm. On the day of the ride, ground was hard packed soil and was running 14psi on both tyre. Any advice?"
Our advice: By sliding do you mean oversteering or understeering?
If it is oversteering I would go 4mm.
If it is understeering I would go 6mm.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment